Theorem’s latest Multi-CAD supports CATIA V5 R28

Our V21.3 CATIA V5 Multi-CAD to JT product has been released with a number of new product features and enhancements, alongside general updates to improve stability and geometry quality.

Integrated within the CATIA V5 application V21.3 supports from CATIA V5-6R2015 to CATIA V5-6R2018, and all versions of JT, up to and including 10.0, providing the user with the highest levels of interoperability with JT file assemblies.

This CATIA V5 Multi-CAD to JT product is uni-directional product but can be packaged with Theorem’s JT to CATIA V5 Multi-CAD product to become a bi-directional translator.

New features and enhancements in V21.3 include:

  • CATIA V5 transparency replicated in JT output-The benefit of maintaining an equivalent view of the CATIA V5 data in JT saves time and money that would otherwise be used to either support additional communication between CAD users and non CAD users, or alternatively increases costs of deploying expensive CAD licenses to downstream teams.
  • Improvements to PMI/geometry cross highlighting in JT output-Having an ability to highlight specifically which pieces of geometry are related to which dimension ensures that the information is unambiguous, leading to a reduction in costly reworking’s of outputs when the information is misunderstood. Consequently potential costly quality issues are also avoided.
  •  CATIA V5 Section Views defined within FTA Captures are now exported to the JT file- Having a capability of retaining these section views in the JT output again ensures that the person reviewing the information as a clear understanding of the definition. This all goes towards avoiding costly mistakes that occur when the information isn’t clearly understandable.

 

Our CATIA V5 Multi-CAD to JT Product is based upon the Dassault Systemes XCAD infrastructure, allowing CATIA V5 users to incorporate parts and assemblies from JT, directly within the CATIA environment and removing the need for external translators. The application checks geometry for errors and validates the integrity of the data as it comes into CATIA. The beauty of the Dassault Multi-CAD architecture is the interlinking of the CATIA data and non-native data.

Using Multi-CAD offers a greater level of security and protection as the link to the source data is a direct link, without the need to leave the application or use 3rd party external applications. This also removes any errors that can occur from working with potentially old and out of date data.

Our strategic partnerships with Dassault Systemes and Siemens  ensures that there is a parallel development between the latest releases of CATIA V5, JT and Theorem’s Multi-CAD products, allowing us to continue to provide data solutions to the CATIA V5 community.

For more information visit www.theorem.com

Start your AR, MR and VR journey in Engineering at Siemens PLM Connections 2018

We will be attending this year’s Siemens PLM Connections in Phoenix, USA, from 4th– 7th June 2018.

As a long standing Siemens PLM solution partner and Vendor Member of the JT Open initiative, the team from Theorem will be on stand #126 to showcase our latest PLM productivity enhancing solutions for the Siemens NX and JT user.

Our widely used Data Exchange and Supply Chain Collaboration solutions for NX and JT are complimented by our 3D PDF publishing and Visualization tools that all support MBD for downstream processes.

You can now also utilize those same CAD and PLM assets in the latest Augmented (AR), Mixed (MR) and Virtual (VR) Reality devices with our data and device agnostic Visualization Experience Application – part of our ‘Digital Realities’ product suite.

Our Publish 3D – 3D PDF suite enables you to publish your NX and JT data to interactive 3D PDF documents that can be shared internally and externally throughout your supply chain.

Whereas our Multi-CAD plugin allows you to insert JT, NX and Creo files into a CATIA design environment, work with them, whilst maintaining associativity in CATIA back to the original JT, NX and Creo formats.

If you need your CAD assets in a lightweight data format such as 3DXML, JT or Creo View, then our Visualize 3D product suite focuses specifically on the direct translation of 3D CAD data from mechanical CAD systems for the purpose of Visualization.

All of which can be reused and optimised for ‘Digital Realities’. At stand #126 you will be able to ‘experience’ our Mixed Device Visualization Experience Application developed to run in the latest digital technologies:

  • Augmented Reality (AR) – Windows 10, Android and iOS Tablets and Phones
  • Mixed Reality (MR) – Microsoft HoloLens
  • Virtual Reality (VR) – HTC Vive and Oculus Rift

If you haven’t yet started thinking about which technology or device is right for your CAD and PLM assets, then the Visualization Experience is the perfect app to help you start to answer the ‘ifs’, the ‘whys’ and the ‘buts’ associated with deploying these new technologies within day to day Engineering and Manufacturing.

The challenge is deciding which technology is best for you and how do you start your journey?

We recently hosted a webinar on the topic which is available to view upon registration:

http://www.theorem.com/Digital-Realities/pr-starting-the-ar-mr-vr-journey.htm

The experience utilises existing CAD and PLM data assets and can also merge data from ERP, MES, CRM and proprietary databases, adding further value to the Digital Realities application which is opening up an entirely new way to interact with Engineering and Manufacturing data up and down the supply chain, in all areas, including: Design, Manufacturing, Assembly, Training, Service and Digital Twin.

For more information visit www.theorem.com

 

Theorem’s latest Creo to CATIA 3DEXPERIENCE Multi-CAD supports R2017x

We are pleased to announce the release of V20.3, the latest version our Creo-CATIA 3DEXPERIENCE Multi-CAD product.

V20.3 supports CATIA 3DEXPERIENCE R2015x, R2016x and R2017x, as well as Creo 2.0, 3.0 and 4.0, providing the user with the highest levels of interoperability. This uni-directional product can be packaged with our CATIA 3DEXPERIENCE Multi-CAD to Creo product, creating a bi-directional translator.

Based upon the Dassault Systemes strategic XCAD technology, our Multi-CAD enables the CATIA 3DEXPERIENCE user to interactively work with native Creo parts and assemblies in an interactive CATIA 3DEXPERIENCE session. This is achieved by simply selecting the Creo part or assembly to be imported into CATIA 3DEXPERIENCE allowing the user to work with the Creo data to perform Design Modification, Design-in-Context and Manufacturing activities.

Multi-CAD products support the introduction of assembly structure, geometry and Functional Tolerancing and Annotation (FTA) together with system defined attribute information and colour information from Creo data with additional support for the processing of Model Based Definition (MBD) information from native CAD. In V20.3 the FTA is supported for both Creo to CATIA 3DEXPERIENCE Multi-CAD, and CATIA 3DEXPERIENCE Multi-CAD to Creo directions.

The Multi-CAD application is an easy to use and efficient solution to the problems that can be encountered when a CATIA 3DEXPERIENCE user needs to work with Creo data regularly during a design project.

Our strategic partnerships with Dassault Systemes and PTC ensures that there is parallel development between the latest releases of CATIA 3DEXPERIENCE, Creo and Theorem’s Multi-CAD products, allowing us to continue to provide data solutions for the CATIA and PTC communities.

For more information visit www.theorem.com

Theorem to showcase a wide range of productivity enhancing solutions for the CATIA user-including AR, MR and VR experiences- at COE 2018

This year’s COE Annual PLM Experience and TechniFair is running April 15th- 18th in San Diego, California, USA and we will be there to demonstrate the latest productivity enhancing solutions for the CATIA user.

Our widely used Data Exchange and Supply Chain Collaboration solutions for 3D EXPERIENCE and CATIA V5 are complimented by 3D PDF publishing and Visualization tools that support MBD for downstream processes.

You can now also utilize those same CAD and PLM assets in the latest Augmented (AR), Mixed (MR) and Virtual (VR) Reality devices with our data and device agnostic Visualization Experience Application – part of our ‘Digital Realities’ product suite.

Our Multi-CAD plugin allows you to insert JT, NX and Creo files into your CATIA session, and work on them, whilst maintaining associativity in CATIA back to the original JT, NX and Creo formats.

Whereas our Publish 3D – 3D PDF suite enables you to publish your CATIA V5 and 3DEXPERIENCE data to interactive 3D PDF document that can be shared internally and externally throughout your supply chain.

If you need your CAD assets in a lightweight data format such as 3DXML, JT or Creo View, then our Visualize 3D product suite focuses specifically on the direct translation of 3D CAD data from mechanical CAD systems for the purpose of Visualization.

All of which can be reused and optimised for ‘Digital Realities’. The Visualization Experience currently runs on the following devices:

  • Augmented Reality (AR) – Windows 10, Android and iOS tablets and phones
  • Mixed Reality (MR) – Microsoft HoloLens
  • Virtual Reality (VR) – HTC Vive and Oculus Rift

Our Visualization Experience app is the perfect app to help you start to answer the ‘ifs’, and the ‘whys’ associated with deploying these new technologies within day to day engineering and manufacturing processes.

The challenge is deciding which technology is best for you, and how do you start your journey?

We recently hosted a webinar on the topic which is available to view upon registration:

http://www.theorem.com/Digital-Realities/pr-starting-the-ar-mr-vr-journey.htm

Find us at booth #100 and ‘experience’ our Visualization Experience Application for Augmented (AR), Mixed (MR) and Virtual (VR) Reality devices- part of our Digital Realities product portfolio.

The experience utilises existing CAD and PLM assets and can also merge data from ERP, MES, CRM and proprietary databases, adding further value to the Digital Realities application which is opening up an entirely new way to interact with Engineering and Manufacturing data up and down the supply chain, in all areas, including: Design, Manufacturing, Assembly, Training, Service and Digital Twin.

For more information visit www.theorem.com

 

Theorem’s latest Multi-CAD supports CATIA V5 R27 and NX 11

Our V20.2 CATIA V5 Multi-CAD to NX product is ready for release with a number of new product features and enhancements alongside general updates to improve stability and geometry quality.

Integrated within the CATIA V5 application, V20.2 supports from CATIA V5-6R2014 to CATIA V5-6R2017, as well as NX 9, 10 and 11, providing the user with the highest levels of interoperability with NX file assemblies.

This CATIA V5 Multi-CAD to NX product can be packaged as a uni-directional product CATIA V5>NX or NX>CATIA V5 or as a bi-directional translator.

Our CATIA V5 Multi-CAD to NX Product is based upon the Dassault Systemes XCAD infrastructure, allowing CATIA V5 users to incorporate parts and assemblies from NX, directly within the CATIA environment and removing the need for external translators. The application checks geometry for errors and validates the integrity of the data as it comes into CATIA. The beauty of the Dassault Multi-CAD architecture is the interlinking of the CATIA data and non-native data.

In V20.2 the Theorem User Interface is supported for both interactive and batch processing of translations external to the CATIA V5 application.

Using Multi-CAD offers a greater level of security and protection as the link to the source data is a direct link, without the need to leave the application or use 3rd party external applications. This also removes any errors that can occur from working with potentially old and out of date data.

Our strategic partnerships with Dassault Systemes and Siemens  ensures that there is a parallel development between the latest releases of CATIA V5, NX and Theorem’s Multi-CAD products, allowing us to continue to provide data solutions to the CATIA V5 community.

For more information visit www.theorem.com

Theorem’s V20.2 CATIA V5 Multi-CAD to JT supports R27

Our V20.2 CATIA V5 Multi-CAD to JT product is ready for release with a number of new product features and enhancements alongside general updates to improve stability and geometry quality.

Integrated within the CATIA V5 application, V20.2 supports from CATIA V5-6R2015 to CATIA V5-6R2017, and all versions of JT, up to and including 10.0, providing the user with the highest levels of interoperability with JT file assemblies.

This CATIA V5 Multi-CAD to JT product is uni-directional product but can be packaged with the JT to CATIA V5 Multi-CAD product to become a bi-directional translator.

Our CATIA V5 Multi-CAD to JT Product is based upon the Dassault Systemes XCAD infrastructure, allowing CATIA V5 users to incorporate parts and assemblies from JT, directly within the CATIA environment and removing the need for external translators. The application checks geometry for errors and validates the integrity of the data as it comes into CATIA. The beauty of the Dassault Multi-CAD architecture is the interlinking of the CATIA data and non-native data.

Using Multi-CAD offers a greater level of security and protection as the link to the source data is a direct link, without the need to leave the application or use 3rd party external applications. This also removes any errors that can occur from working with potentially old and out of date data.

Our strategic partnerships with Dassault Systemes and Siemens  ensures that there is a parallel development between the latest releases of CATIA V5, JT and Theorem’s Multi-CAD products, allowing us to continue to provide data solutions to the CATIA V5 community.

For more information visit www.theorem.com

Theorem’s latest CATIA 3DEXPERIENCE Multi-CAD to NX product released

We are pleased to announce the release of our latest CATIA 3DEXPERIENCE Multi-CAD for NX solution.

V20.2 supports CATIA 3DEXPERIENCE R2015x, R2016x and R2017x, along with NX 9.0, 10.0 and 11.0, providing the user with the highest levels of interoperability.

This uni-directional product can be packaged with our NX to CATIA 3DEXPERIENCE Multi-CAD to create a bi-directional product.

There is also a PMI Add-on that can be purchased to provide additional functionalities.

The PMI add-on allows FTA data to be translated between CATIA 3DEXPERIENCE and NX formats. The translation of 3D PMI data allows the output to be used directly in downstream assembly and manufacturing processes.

Based upon Dassault Systemes strategic XCAD technology, our Multi-CAD enables the CATIA 3DEXPERIENCE user to work with native NX parts and assemblies in an active CATIA 3DEXPERIENCE session. This is achieved by simply selecting the NX part or assembly to be imported into CATIA 3DEXPERIENCE allowing the user to work with the NX data to perform Design Modification, Design-in Context and Manufacturing activities.

Multi-CAD products support the introduction of assembly structure, geometry and Functional Tolerancing and Annotations (FTA) together with system defined attribute information and colour information from NX data with additional support for the processing of Model Based Definition (MBD) information from native CAD.

The Multi-CAD application is an easy to use and efficient solution to the problems that can be encountered when a CATIA 3DEXPERIENCE user needs to work with NX data regularly during a design project.

Our strategic partnerships with Dassault Systemes and Siemens ensures that there is parallel development between the latest releases of CATIA 3DEXPERIENCE and NX, and Theorem’s Multi-CAD products, allowing us to continue to provide data solutions for the CAD community.

For more information visit www.theorem.com